topic Re: ISE BoM in Network Access Control

ISE BoM

sumjoy_vicky — Fri, 12 Jun 2020 15:25:30 GMT

Hello,

We are planning to install 2 ISE servers in UAE. Can advise how to get BoM for SNS-3655 ISE appliance (HW + SW) with 2500 End users licenses (Base + Admin)?

Re: ISE BoM

balaji.bandi — Fri, 12 Jun 2020 15:42:12 GMT

Good ISE BoM tool available :

https://ise-bom.cisco.com/

here is sizing guide based on the users :

https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148

https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/install_guide/b_ise_InstallationGuide24/b_ise_InstallationGuide24_chapter_00.html

Re: ISE BoM

Nadav — Sat, 13 Jun 2020 11:07:04 GMT

It's worth adding the following:

There is no end-user Admin license. You have base/plus/apex to choose from, depending on your needs. Each plus/apex requires a base license.
Your BOM will change drastically depending on your topology. Installing all personas on a single ISE server is definitely possible with one 3655 server, but you wouldn't have any HA or DR. You should take a look at the ISE network deployment chapter and decide from there what your BOM should look like: https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/install_guide/b_ise_InstallationGuide26/b_ise_InstallationGuide_26_chapter_00.html
You'll want to take a look at this to make sure your topology matches your sizing demands in case your sizing needs to be updated. 2500 sessions isn't much, but you should know where to look: https://community.cisco.com/t5/security-documents/ise-performance-amp-scale/ta-p/3642148#toc-hId--1749350694