topic Re: ISE 2.7 Network Devices export/ Blank CSV in Network Access Control

ISE 2.7 Network Devices export/ Blank CSV

ChrysostomosTzouros — Fri, 31 Jul 2020 05:51:48 GMT

Hello team,

We are facing this weird issue.

When we are trying to export network devices standalone/group/all, we are getting a blank csv.

We are currently using ise version 2.7 patch 1.

We tried using different browsers, same result.

We tried to import a test device, we managed to export it alone but when we try to export all we are not even getting the test one.

The account we use has admin rights.

These network devices were added via restore of a configuration backup. Maybe that caused the issue?

Any suggestions?

Re: ISE 2.7 Network Devices export/ Blank CSV

Dinesh Moudgil — Fri, 31 Jul 2020 10:16:49 GMT

Hello,

Please confirm if your NADs are configured with description or not.

If not, can you please perhaps add description to few NADs and see if you are able to export them?

There were few issues reported where patch 2 resolved the issue so you can try that as well.

Thanks,

Dinesh Moudgil

P.S. Please rate helpful posts.

Re: ISE 2.7 Network Devices export/ Blank CSV

ChrysostomosTzouros — Fri, 31 Jul 2020 11:12:55 GMT

Hello Dinesh

thank you for your answer.

I will try what you proposed and i will update the post as soon as i have any results.

Best regards

Chrysostomos Tzouros