topic cisco ISE Guest Web authentication doesn't work with SG300 switch in Network Access Control

cisco ISE Guest Web authentication doesn't work with SG300 switch

Qays — Sun, 20 Sep 2020 09:25:40 GMT

I used cisco SG300 switches as access switch and I trying to use cisco ISE as NAC, I have configured the switches and the ISE, the authentication and authorization works for the Active Directory users, but the Guest web users authentication doesn't work, I have configured every thing as the documentation.

Is the problem in the switch doesn't support COA and DACL ???

Thanks...

Re: cisco ISE Guest Web authentication doesn't work with SG300 switch

Mark Elsen — Sun, 20 Sep 2020 09:33:28 GMT

- The SG seems not supported by ISE :

https://www.cisco.com/c/en/us/support/security/identity-services-engine/products-device-support-tables-list.html

Re: cisco ISE Guest Web authentication doesn't work with SG300 switch

Qays — Sun, 20 Sep 2020 09:58:53 GMT

Thanks for the answer......

Re: cisco ISE Guest Web authentication doesn't work with SG300 switch

Qays — Sun, 20 Sep 2020 10:04:19 GMT

Could you advise me which series of access switches that I should use...

Thanks,,,,,

Re: cisco ISE Guest Web authentication doesn't work with SG300 switch

Mark Elsen — Sun, 20 Sep 2020 11:17:35 GMT

- That depends on your Intranet's network 'power needs' for a generic start go here :

https://www.cisco.com/c/en/us/products/switches/switch-selector.html

(but keep an eye on the ise compatibility matrix as posted earlier).

Re: cisco ISE Guest Web authentication doesn't work with SG300 switch

Qays — Sun, 20 Sep 2020 11:20:43 GMT

OK ,,, Thanks