https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159750#M563122 <P>It should work if it connecting to a switch with multi-auth with its own IP and no NAT and has not max out the session limited supported on the switch.</P> Wed, 30 Sep 2020 23:47:19 GMT hslai 2020-09-30T23:47:19Z https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159025#M563084 <P>Does Cisco ISE support posture assessment of endpoints connected through Citrix NetScaler VDI and Citrix NetScaler VPN Adapter agent?</P> Tue, 29 Sep 2020 20:48:37 GMT https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159025#M563084 jmcgourt@cisco.com 2020-09-29T20:48:37Z https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159750#M563122 <P>It should work if it connecting to a switch with multi-auth with its own IP and no NAT and has not max out the session limited supported on the switch.</P> Wed, 30 Sep 2020 23:47:19 GMT https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159750#M563122 hslai 2020-09-30T23:47:19Z https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159840#M563126 No, they don't for exactly the same reason that <a href="https://community.cisco.com/t5/user/viewprofilepage/user-id/113005">@hslai</a> mentioned. I have<BR />been trying this with Citrix VDI and Azure WVD and they both failed on<BR />this. This is a big show stopper to progress VDI as you can go advanced in<BR />rules implementation when you integrate ISE with FTDv for AD-Groups based<BR />rules (again SGT isn't supported in Citrix or Azure clouds).<BR /><BR />***** please remember to rate useful posts<BR /> Thu, 01 Oct 2020 06:06:26 GMT https://community.cisco.com/t5/network-access-control/vdi-support-in-ise/m-p/4159840#M563126 Mohammed al Baqari 2020-10-01T06:06:26Z