topic ISE posture agent bulk installation in Network Access Control

ISE posture agent bulk installation

manvik — Sat, 17 Oct 2020 05:57:39 GMT

Is there anyway to install anyconnect posture agent manually. Currently agent is downloaded from client provisioning portal.

While installing this agent, system admin password is prompted. Most users are not admins.

Just checking, anyway for system administrator to manually install the anyconnect posture agent. Same way we install anyconnect VPN agent.

Re: ISE posture agent bulk installation

Mohammed al Baqari — Sat, 17 Oct 2020 06:50:49 GMT

Hi,

You can do that from software installation tool such as sccm.

***** please remember to rate useful posts

Re: ISE posture agent bulk installation

manvik — Sat, 17 Oct 2020 08:08:48 GMT

from where do i download the anyconnect posture agent.

Re: ISE posture agent bulk installation

Aref Alsouqi — Sun, 18 Oct 2020 16:39:38 GMT

ISE Posture module is part of AnyConnect Pre-Deployment package. You can download the package from software.cisco.com. When you launch the setup file, you will see the list of all the modules you can install, by default all of them would be selected, deselect all and leave the core module, ISE posture, and DART for potential troubleshooting:

Re: ISE posture agent bulk installation

manvik — Mon, 19 Oct 2020 06:00:47 GMT

Thank you @Aref Alsouqi

That helps.