https://community.cisco.com/t5/network-access-control/using-ldaps-for-management-access-to-cisco-9300/m-p/4176713#M563589 <P>I don't believe that is supported, LDAP would not support interactive login to the devices. If you don't have a dedicated RADIUS or better a TACACS server, then you can use RADIUS by enabling NPS services on your AD server.</P> Fri, 30 Oct 2020 21:59:46 GMT Aref Alsouqi 2020-10-30T21:59:46Z https://community.cisco.com/t5/network-access-control/using-ldaps-for-management-access-to-cisco-9300/m-p/4176658#M563588 <P>I am looking to utilize LDAPS (secure version of ldap tcp 636) for authentication mechanism on Cisco 9300 switch. When users login via HTTPS/SSH they would use their Microsoft AD account to do so. Is this possible? Currently working on solution and don't want to waste time if it is not possible. Any help would be greatly appreciated Cisco Community.</P> Fri, 30 Oct 2020 18:52:51 GMT https://community.cisco.com/t5/network-access-control/using-ldaps-for-management-access-to-cisco-9300/m-p/4176658#M563588 Th0rv4l 2020-10-30T18:52:51Z https://community.cisco.com/t5/network-access-control/using-ldaps-for-management-access-to-cisco-9300/m-p/4176713#M563589 <P>I don't believe that is supported, LDAP would not support interactive login to the devices. If you don't have a dedicated RADIUS or better a TACACS server, then you can use RADIUS by enabling NPS services on your AD server.</P> Fri, 30 Oct 2020 21:59:46 GMT https://community.cisco.com/t5/network-access-control/using-ldaps-for-management-access-to-cisco-9300/m-p/4176713#M563589 Aref Alsouqi 2020-10-30T21:59:46Z