topic NMAP Probe on Cisco ISE in Network Access Control

NMAP Probe on Cisco ISE

SaintEvn — Sun, 06 Dec 2020 14:57:23 GMT

Hi,
For NMAP probe in cisco ISE profiling , do I need any configuration for access-switch ?

Is SNMP configuration needed for NMAP?

Thanks

balaji.bandi — Sun, 06 Dec 2020 17:14:09 GMT

what is the goal here?

it uses SNMP configuration already in ISE configured, if you doing against profile?

SaintEvn — Sun, 06 Dec 2020 17:28:21 GMT

I would like to use NMAP scan information in custom profiling like OS Scan, Common port Scan, etc.

In this case, Do I need extra configuration for NMAP on the switch side?

Rob Ingram — Sun, 06 Dec 2020 17:45:32 GMT

No you don't need any configuration on the switch for NMAP.

NMAP initated from ISE, directly communicates with the endpoints in order learn information used for profiling.

HTH

balaji.bandi — Sun, 06 Dec 2020 17:48:11 GMT

As i mentioned ISE SNMP configure uses it not required any more advanced config.