topic Re: l2tp vpn client change password in ISE in Network Access Control

l2tp vpn client change password in ISE

hamidreza.taghipur — Sun, 06 Dec 2020 08:39:27 GMT

i use cisco router (in edge)for remote access vpn server for windows clients (users connect from internet ) and router
use aaa server (CISCO ISE 2.4) for authentication users .
my problem :
how remote access vpn users (L2TP Over IPSEC) can change password after connect ?
can i use cisco ise Guest Portal for this problem ? if yes , how ?
thanks

Re: l2tp vpn client change password in ISE

balaji.bandi — Sun, 06 Dec 2020 08:49:24 GMT

is this a AD integration or Local users in ISE ?

Re: l2tp vpn client change password in ISE

hamidreza.taghipur — Sun, 06 Dec 2020 09:08:18 GMT

Local users in ISE

Re: l2tp vpn client change password in ISE

Rob Ingram — Sun, 06 Dec 2020 10:24:27 GMT

@hamidreza.taghipur You can create a MyDevices portal, they can change the password once logged into the portal. This will change their internal ISE password used for the VPN.

HTH

Re: l2tp vpn client change password in ISE

hamidreza.taghipur — Sun, 06 Dec 2020 15:20:22 GMT

Thanks for reply ,

I create device portal the same sample

https://community.cisco.com/t5/network-access-control/ise-password-change-portal-ucp-with-my-devices-portal/m-p/3475680

But users after connect vpn , can not open portal url (https://ise ip:8443) and just show certificate error page , should i create authorize rule for this ?

Re: l2tp vpn client change password in ISE

Rob Ingram — Sun, 06 Dec 2020 16:14:44 GMT

When you say certificate error, is it just that the users don't trust the certificate in use on that portal? If they just acknowledge the certificate error, they should be able to continnue and the portal will be presented. If you don't want this error you could use a certificate signed by a public CA.

Provide a screenshot if that is not the case.

Re: l2tp vpn client change password in ISE

hamidreza.taghipur — Sun, 06 Dec 2020 16:20:51 GMT

Excuse me

my purpose in certificate error was " this is blank page with certificate error "

And i have not login change password page

Re: l2tp vpn client change password in ISE

Rob Ingram — Sun, 06 Dec 2020 17:06:38 GMT

So you created a mydevices portal using the example you provided?

Did you configure it to listen on port 8443 as you specified?

Provide screenshots of your mydevices portal configure and the error you get.

Re: l2tp vpn client change password in ISE

hamidreza.taghipur — Mon, 07 Dec 2020 06:13:00 GMT

i send my config screenshot , i have not any logs endpoint id after connect vpn clients , and no endpoint identity group

Re: l2tp vpn client change password in ISE

Rob Ingram — Mon, 07 Dec 2020 09:59:14 GMT

Under the portal configuration, click the portal test URL - use that url. Alternatively define an FQDN under the configuration, you'll need a DNS entry on your internal DNS server.

Re: l2tp vpn client change password in ISE

hamidreza.taghipur — Mon, 07 Dec 2020 14:28:39 GMT

The problem could not be solved 😐