topic Re: Customizing Cisco ISE 2.4 operation reports with customer policy labels in Network Access Control

Customizing Cisco ISE 2.4 operation reports with customer policy labels

Pete C — Thu, 17 Dec 2020 16:54:52 GMT

With Cisco ISE 2.4 is it possible to customize the operation reports so that when you export to CSV or PDF it includes Header information the customer security policy information.

Re: Customizing Cisco ISE 2.4 operation reports with customer policy labels

Greg Gibbs — Fri, 18 Dec 2020 00:57:24 GMT

It's not entirely clear what kind of customisation you're looking for, so we would need more details. To which specific report are you referring? What specific 'customer policy labels' are you talking about?

The ISE reports allow limited customisation. If custom attributes have been configured, there is no way to add them as fields in the reports. Depending on what information you are looking for, it may require manually correlating information from various reports.

For more flexibility in reporting data, we typically recommend sending all relevant logging information to an external syslog server (like Splunk) and creating the required reports and/or dashboards there.

Re: Customizing Cisco ISE 2.4 operation reports with customer policy labels

Pete C — Fri, 18 Dec 2020 09:50:21 GMT

Thank you very much for the response.
To clarify, when I go to Operations > Reports > and then Select any report, but for example Radius Authentication. I don't want to amend any fields. As an example I am wanting to add " mycompany.com - this information is Restricted and Confidential" so that when I Export to a PDF. The "mycompany.com - this information is Restricted" appears at the top or bottom of the page.
Thanks again

Re: Customizing Cisco ISE 2.4 operation reports with customer policy labels

hslai — Mon, 21 Dec 2020 03:43:23 GMT

Not an option today.