topic Questions about Cisco ACS: 1. turn-off logging on console via CLI 2. configure a user via the CLI in Network Access Control

Questions about Cisco ACS: 1. turn-off logging on console via CLI 2. configure a user via the CLI

ronjonjonjon1 — Mon, 05 Apr 2021 16:26:19 GMT

I have tried 'no logging console' on ACS CLI, and it did NOT turn off messages within the putty session. I have also tried the command 'logging loglevel <#>' to try to stop the logging within my putty session and it didn't stop the logging messages.

I am also trying to configure a username via the CLI and all I keep finding is mention of creating an ACS admin, but I need to configure an actual username and password, akin to configuring it in the Users menu in the GUI.

Thanks for your help!

Re: Questions about Cisco ACS: 1. turn-off logging on console via CLI 2. configure a user via the CLI

balaji.bandi — Mon, 05 Apr 2021 16:47:00 GMT

Not sure what is the use case here, when you have all the option available in GUI why you like to use CLI, ?

1. turn-off logging on console via CLI

- ACS Logs or device Logs ?

2. configure a user via the CLI (try below commands, never tried, but duable i guess)

https://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_secure_access_control_system/5-7/command/reference/cli/cli_over.html#76298

Re: Questions about Cisco ACS: 1. turn-off logging on console via CLI 2. configure a user via the CLI

ronjonjonjon1 — Mon, 05 Apr 2021 16:49:43 GMT

I currently have a different problem I asked a question for. I cannot access ACS via the web GUI. That is why I am trying to configure with the CLI. I have erroneous logging that is ouputting into the CLI, similar to interface resets, etc in Routers and switches, so I guess this would be device logs?

Re: Questions about Cisco ACS: 1. turn-off logging on console via CLI 2. configure a user via the CLI

thomas — Sun, 25 Apr 2021 20:28:50 GMT

All versions of ACS are End of Support as of August 2020.

Please install and use ISE instead. You may download a free copy of ISE with a 90-day evaluation upon installation at https://cs.co/ise-software