https://community.cisco.com/t5/network-access-control/how-to-disable-prompt-enable-password-after-login-using-radius/m-p/4404588#M567354 <P>Please take a look at the following example:&nbsp;<A href="https://bluenetsec.com/priv-level-15-with-cisco-ise/" target="_blank">Privilege Level 15 with Cisco ISE | Blue Network Security (bluenetsec.com)</A></P> <P>HTH!</P> Tue, 18 May 2021 12:20:24 GMT Mike.Cifelli 2021-05-18T12:20:24Z https://community.cisco.com/t5/network-access-control/how-to-disable-prompt-enable-password-after-login-using-radius/m-p/4404516#M567348 <P>Hi im already config radius authentication like this, and success login with local username too<BR />but after success login using local username / radius, why always ask to type enable/en, and show the prompt "&gt;" even though I have a config like this</P><P><BR />aaa authentication login XTI-AAA local group IEGRADIUS<BR />aaa authentication enable default none<BR />aaa authorization exec XTI-AAA local group IEGRADIUS</P><P>&nbsp;</P><P>Switch-02-01&gt;en<BR />Switch-02-01#</P><P>&nbsp;</P> Tue, 18 May 2021 09:21:35 GMT https://community.cisco.com/t5/network-access-control/how-to-disable-prompt-enable-password-after-login-using-radius/m-p/4404516#M567348 sandyma 2021-05-18T09:21:35Z https://community.cisco.com/t5/network-access-control/how-to-disable-prompt-enable-password-after-login-using-radius/m-p/4404588#M567354 <P>Please take a look at the following example:&nbsp;<A href="https://bluenetsec.com/priv-level-15-with-cisco-ise/" target="_blank">Privilege Level 15 with Cisco ISE | Blue Network Security (bluenetsec.com)</A></P> <P>HTH!</P> Tue, 18 May 2021 12:20:24 GMT https://community.cisco.com/t5/network-access-control/how-to-disable-prompt-enable-password-after-login-using-radius/m-p/4404588#M567354 Mike.Cifelli 2021-05-18T12:20:24Z