Secondary and Primary monitoring nodes logs replication

SMD28316 — Thu, 17 Jun 2021 11:37:24 GMT

In the document, it's mentioned that the MnT nodes receive their logs from PSNs and PANs in the deployment, what about the logs in the primary MnT? do they get replicated to the secondary MnT node as well?

If I registered a new MnT node in the deployment, does it get a copy of the logs in the Primary MnT node?

Re: Secondary and Primary monitoring nodes logs replication

Marcelo Morais — Thu, 17 Jun 2021 14:29:46 GMT

Hi @SMD28316 ,

remember that:

"... the MnT Node is responsible for the logging and reporting functions of ISE. All PSNs will send their logging data to the MnT Node as syslog messages (UDP port 20514).

When there are two MnT Nodes in an ISE Deployment, all ISE Nodes send their audit data to both MnT Nodes at the same time.

Upon an MnT failure, all Nodes continue to send logs to the remaining MnT Node. Therefore, no logs are lost. The PAN retrieves all log and report data from the remaining MnT Node, so there is no administrative function loss, either. However, the log database is not synchronized between the Primary and Secondary MnT Nodes. Therefore, when the MnT Node returns to service, a backup and restore of the MnT Node is required to keep the two MnT Node in complete sync..."

Hope this helps !!!

topic Re: Secondary and Primary monitoring nodes logs replication in Network Access Control

Secondary and Primary monitoring nodes logs replication

Re: Secondary and Primary monitoring nodes logs replication