topic Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches in Network Access Control

Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

try3 — Wed, 23 Jun 2021 11:18:25 GMT

Hello

I have some Extreme Switches which need to use RADIUS authenticaiton to login the switches

I need to see a template of extreme under network device profile ont he ISE 3.0

How can I solve this problem?

Please forward my request if I am on wrong location

Regards

Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

Mark Elsen — Wed, 23 Jun 2021 11:27:33 GMT

- FYI : https://extremeportal.force.com/ExtrArticleDetail?an=000074221

Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

try3 — Wed, 23 Jun 2021 11:36:38 GMT

I read the link. it did not solve problem. I think I need to download a template network device profile for extreme and then import the template on ISE or need intruction to create a new network device profile for extrem

Thanks

Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

balaji.bandi — Wed, 23 Jun 2021 11:41:11 GMT

check the compatability matrix which ISE support :

https://www.cisco.com/c/en/us/td/docs/security/ise/3-0/compatibility_doc/b_ise_sdt_30.html

Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

Marcelo Morais — Wed, 23 Jun 2021 12:21:27 GMT

Hi @try3 ,

at Administration > Network Resource > Network Device Profiles the Extreme profile is not a Cisco Provided, although the Extreme X440-48p appears on the Validated Third Party Access Switches (check @balaji.bandi post).

For Extreme you should create this template, in other words: User Defined.

Hope this helps !!!

Re: Extreme Switches and ISE 3.0 - RADIUS authenticaiton to login the switches

Greg Gibbs — Wed, 23 Jun 2021 22:30:12 GMT

See How to Create ISE Network Access Device Profiles. If you build a working profile for your Extreme switches, please share it with the Community for anyone else that might want to use it.

Information on how to share NAD Profiles can be found in How to Contribute Network Device Profiles