topic ISE: Insufficient Privilege in Network Access Control

ISE: Errors in ADE.log backup aborted

naoki_Japan — Mon, 25 Oct 2021 06:59:34 GMT

ISE INDEXING ENGINE BACKUP FAILED : Errors in ADE.log. Backup aborted

Using Standalone ISE node, I found the above log and can not take backup.

Why this haapens?

ISE: Insufficient Privilege

naoki_Japan — Mon, 25 Oct 2021 06:02:13 GMT

I used distributed deployment.

But I set ISE nodes back to standalone and reset their config by the command "application reset-config ise" since I could not take backup due to the log "ISE INDEXING ENGINE BACKUP FAILED : Errors in ADE.log. Backup aborted".

After that, as test, when I login to a ise device(standalone) and tried taking backup, the above picture log appeared.

However, I can have an access the backup page by Dashboard > Backup & Restore although I can not by other way(example, Maintenance > Backup & Restore).

So far, I cannot take backup.

Please help me with this problem.

Re: ISE: Insufficient Privilege

Mark Elsen — Mon, 25 Oct 2021 07:27:15 GMT

- You can also take backup from the CLI.

Re: ISE: Errors in ADE.log backup aborted

balaji.bandi — Mon, 25 Oct 2021 09:01:37 GMT

how are you doing, local backup or remote backup

refer below guide :

https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_01011.html

Re: ISE: Errors in ADE.log backup aborted

naoki_Japan — Tue, 26 Oct 2021 02:07:47 GMT

The cause of this problem is seemed to be malfunction ADE OS had.

After the command "#reset-config", I can back the data up.

THX

Re: ISE: Errors in ADE.log backup aborted

mohanakrishnan-muthukrishnan — Tue, 17 Dec 2024 12:56:13 GMT

Hi Naoki,

Will this command #reset-config", erase the existing data or any data loss will be there ?

Regards

Mohan