Cisco ISE requirements

TrickTrick — Thu, 04 Nov 2021 14:53:26 GMT

Hi,

For a new ISE deployment (first for me), I would like to know the environnement requirements that a client should put in place for ISE installation and integration and general operating, based on the following article : https://community.cisco.com/t5/security-documents/getting-started-with-ise/ta-p/3643552#toc-hId--1301979311

Only DNS, and NTP are required, I can add Firewall ports as well, what else should I ask the client to put in place, more than that, is there any specific versions to respect like for example only DNS based on windows 2016 is supported, previous versions are not, etc ...

There's such info somewhere in cisco.com I just couldn't find it

Thank you in advance

Re: Cisco ISE requirements

balaji.bandi — Thu, 04 Nov 2021 15:13:41 GMT

ISE basic requirement DNS/ NTP / any Certs - depends installation, is this device administration or identity engine for 802.1x or other stuff ..look at the installation guide :

https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/InstallGuide27/b_ise_InstallationGuide27/b_ise_InstallationGuide27_chapter_00.html

Also deployment check list :

https://community.cisco.com/t5/security-documents/ise-planning-amp-pre-deployment-checklists/ta-p/3622635

topic Re: Cisco ISE requirements in Network Access Control

Cisco ISE requirements

Re: Cisco ISE requirements