topic Re: ISE: IP Access restriction in Network Access Control

ISE: IP Access restriction

naoki_Japan — Wed, 17 Nov 2021 01:24:30 GMT

The IP address of administrator PC is 10.49.216.112/24, and I added the IP address into "IP list for Access restriction"(10.49.216.112 MASK 32).

However, the message "Oops. Something went wrong. access is denied, please contact your administrator" is displayed", even after I added 10.0.0.0 MASK 8 into the list.

Re: ISE: IP Access restriction

balaji.bandi — Wed, 17 Nov 2021 06:33:12 GMT

is this for your ISE GUI access ?

Re: ISE: IP Access restriction

naoki_Japan — Wed, 17 Nov 2021 06:45:24 GMT

yes
Also, the version is 3.0

Re: ISE: IP Access restriction

balaji.bandi — Wed, 17 Nov 2021 07:52:08 GMT

Can you post the screen shot to look below for reference :

Re: ISE: IP Access restriction

claudioparker — Wed, 08 Jun 2022 20:19:49 GMT

Finally you resolved? i have same issue version 3

Re: ISE: IP Access restriction

Greg Gibbs — Thu, 09 Jun 2022 00:37:24 GMT

This is likely due to this bug which is listed as fixed in 3.0 Patch 3 - https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvw36486

If you have the latest patch installed for 3.0 and still have this issue, you will likely need to open a TAC case to investigate further.