topic Re: Python script to export endpoint and all attributes cisco ise in Network Access Control

Python script to export endpoint and all attributes cisco ise

ggmeza1983 — Wed, 17 Nov 2021 13:01:31 GMT

Hi, can you help me with this?

I need to create a script on python to export all endpoint and attributes from cisco ise (2.6), like the export from gui (context visibility - endpoints,. export all).

Thanks.

Gustavo.

Re: Python script to export endpoint and all attributes cisco ise

Mike.Cifelli — Wed, 17 Nov 2021 13:38:40 GMT

There are tons of resources that can help you with this journey. Take a peek at section APIs and Programmability here: Cisco ISE & NAC Resources - Cisco Community

It sounds like you are after the following API (Get All endpoints):

GET | https://x.x.x.x:9060/ers/config/endpoint

I would also recommend to take a peek at the online sdk. https://pan_ip:9060/ers/sdk#

Curl is a good tool for you to gain a better understanding on how to interact with the APIs, and what types of responses you will see before you migrate into a python script. Good luck & HTH!

Re: Python script to export endpoint and all attributes cisco ise

thomas — Wed, 17 Nov 2021 14:55:21 GMT

See and the ISE API Reference at https://cs.co/ise-api

You may also want to try the ISE APIs, Ansible, and Automation DevNet Learning Lab which will teach you about how to install your Python environment and run a basic script with the API.