topic Re: URL Redirect Posture ISE Firepower don't working in Network Access Control

URL Redirect Posture ISE Firepower don't working

zinedinzidane — Thu, 02 Dec 2021 19:29:48 GMT

Hello,

my redirection page launches but displays a timeout. ( https://ip_ISE.:8443/portaletc.....) I opened all the ports between my Annyconnect client and my ISE node. I have a firewall. I ping my ISE, but it still shows no detected policy servers and remains in unknown compliance. I followed the Cisco documentation.https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine-22/210523-ISE-posture-style-comparison-for-pre-and.html
I do not know what to do 😞
Someone would have a solution if he
Please. thank you so much
Annyconnect 4.10.031
ISE 2.7 patch 3
Compliance module 4.3.22

FTD2140

Re: URL Redirect Posture ISE Firepower don't working

balaji.bandi — Thu, 02 Dec 2021 21:08:06 GMT

can you try is that URL works? what Error do you get in the browser?

Re: URL Redirect Posture ISE Firepower don't working

zinedinzidane — Thu, 02 Dec 2021 21:33:06 GMT

No the URL doesnt work.

Error message: the site does not allow connection

Thanks

Re: URL Redirect Posture ISE Firepower don't working

balaji.bandi — Thu, 02 Dec 2021 22:17:02 GMT

That means in the path something blocking, that required investigation, also you need open port 80 also some redirections.

Re: URL Redirect Posture ISE Firepower don't working

zinedinzidane — Fri, 03 Dec 2021 07:25:14 GMT

Thanks but i already open all ports in my firewall :(,. In my ftd, i need open port ? I already create policies any any.......

Help help Many thanks

Re: URL Redirect Posture ISE Firepower don't working

zinedinzidane — Sun, 05 Dec 2021 09:15:17 GMT

Hello,

For information, i open all port betwenn endpoint annyconnect and ISE but i have the same error....... I need to open specifi port betwenn FTD and ISE ??

Thanks

Re: URL Redirect Posture ISE Firepower don't working

thomas — Fri, 10 Dec 2021 04:12:46 GMT

HTTPS timeout sounds like a firewall problem from the endpoint to ISE.

Call TAC to troubleshoot.

Re: URL Redirect Posture ISE Firepower don't working

Peter Koltl — Sat, 11 Dec 2021 21:52:22 GMT

Check if you have a rule in the client provisioning policy.

Check the client provisioning portal settings too.