topic Re: cisco ise 3.1 migration tool in Network Access Control

cisco ise 3.1 migration tool

kelvin.low2007 — Sun, 05 Dec 2021 12:46:22 GMT

hi,

i cant seem find migration tool for 3.1, is that mean 3.1 not ready and not good enough yet ?

Re: cisco ise 3.1 migration tool

balaji.bandi — Sun, 05 Dec 2021 13:18:14 GMT

Not sure from what version you looking to Migrate, there is a Migration tool that help you with ISE 3.0, not major changes (other than some additional bugs fixed and addon added based on the requirement)

Read the release notes : (this is your requirement must, open a TAC case, they assists you better or contact partners whom you buying solution can assist better here)

https://www.cisco.com/c/en/us/td/docs/security/ise/3-1/release_notes/b_ise_31_RN.html

Re: cisco ise 3.1 migration tool

Greg Gibbs — Sun, 05 Dec 2021 22:33:33 GMT

If you are referring to the ACS to ISE Migration Tool, Cisco ACS software has been End of Support for over a year now. There will likely be no more development on the Migration Tool after the last release for ISE 3.0.

If you still need to migrate an ACS database to ISE for use in ISE 3.1, you would likely need to migrate the DB to ISE 3.0, then either upgrade that instance to 3.1 or do a backup and restore from 3.0 to 3.1.

Re: cisco ise 3.1 migration tool

kelvin.low2007 — Sun, 05 Dec 2021 22:36:40 GMT

thanks ... look like 3.0 is the last version that has acs migration tool...