ISE profiler manual update error after 3.0 upgrade

stephendrkw — Sat, 27 Nov 2021 16:42:39 GMT

Hi all,

I upgraded my Standalone VM ISE Server today from 2.4 to 3.0 patch 4.

Because my VM does not have access to my Proxy Infrastructure, I downloaded the latest feed file .gpg and tried a manual offline Feed Service Profiler apply, which failed with the following error (FYI - I as able to manually download and apply the latest Posture update without issues)

There is another update already in progress, and each system can only have one update running at a time. You have to wait for the current update to finish before starting the new update.

Latest applied feed occured on:

2021-11-08 09:29:28 GMT

I know the above feed date apply is the Patch 4 release date, so I expect that! I haven't undone the update as there are endpoints connected and this will remove everything. Has anyone come across this issue? Or any suggestions.

Re: ISE profiler manual update error after 3.0 upgrade

Arne Bier — Thu, 09 Dec 2021 05:07:55 GMT

I have not come across this myself.

Possibly an application stop/start will kill any stuck processes. And then try feed the .gpg file again.

topic Re: ISE profiler manual update error after 3.0 upgrade in Network Access Control

ISE profiler manual update error after 3.0 upgrade

Re: ISE profiler manual update error after 3.0 upgrade