https://community.cisco.com/t5/network-access-control/ise-3-0-alarming-non-functional/m-p/4560475#M573011 <P>Okay issue was resolved. The mail server was blocking the alerts from the ISE nodes. Adding the IP of ISE nodes to mail server fixed the issue.</P><P>&nbsp;</P><P>ISE configuration and understanding was correct.</P> Sun, 27 Feb 2022 18:55:34 GMT old roo 2022-02-27T18:55:34Z https://community.cisco.com/t5/network-access-control/ise-3-0-alarming-non-functional/m-p/4560290#M572999 <P>Hi all,</P><P>&nbsp;</P><P>I am trying to work out why i am not getting alerted via email when an alarm is triggered in ISE.</P><P>&nbsp;</P><P>I have global alarm email addresses specified.</P><P>On specific alarms i have multiple email addresses. (My understanding when this is done it overrides the global configuration.</P><P>Alarms are enabled.</P><P>The triggered alarms are viewable in the dashboard.</P><P>The mail server test functions.</P><P>&nbsp;</P><P>Is there something i have missed ? Or overlooked ?</P><P>&nbsp;</P><P>&nbsp;</P><P>&nbsp;</P> Sat, 26 Feb 2022 22:48:57 GMT https://community.cisco.com/t5/network-access-control/ise-3-0-alarming-non-functional/m-p/4560290#M572999 old roo 2022-02-26T22:48:57Z https://community.cisco.com/t5/network-access-control/ise-3-0-alarming-non-functional/m-p/4560475#M573011 <P>Okay issue was resolved. The mail server was blocking the alerts from the ISE nodes. Adding the IP of ISE nodes to mail server fixed the issue.</P><P>&nbsp;</P><P>ISE configuration and understanding was correct.</P> Sun, 27 Feb 2022 18:55:34 GMT https://community.cisco.com/t5/network-access-control/ise-3-0-alarming-non-functional/m-p/4560475#M573011 old roo 2022-02-27T18:55:34Z