topic Re: Cisco ISE sending logs to NXLog in Network Access Control

Cisco ISE sending logs to NXLog

Desmond Lee — Tue, 22 Mar 2022 14:16:50 GMT

Hi, is it possible to send logs from Cisco ISE (version 3.0) to NXLog ?

I know nothing about NXLog, but see that they have some kind "agents" stuff.

Will it be as simple as pointing to the NXLog server IP, or do I need to install anything at ISE ?

Thanks,

Desmond

balaji.bandi — Tue, 22 Mar 2022 14:23:38 GMT

You need to configure ISE to send logs to remote log server as below :

Administration > System > Logging > Remote Logging Targets.