topic Anyconnect Posture Client Deployment in Network Access Control

Anyconnect Posture Client Deployment

Blackhawk1278 — Fri, 25 Mar 2022 19:11:30 GMT

Hello,

I am working on deploying the anyconnect posture client to allow integration with SCCM and be able to perform remediation and compliance checking. I am unclear on where the posture client profile configuration would need to be saved on the hard drive and do not plan on doing the installation using ISE and the portal capabilities. I just want to mass install the client and I need to know where to put the configuration instructions for the client to run correctly.

Re: Anyconnect Posture Client Deployment

Rob Ingram — Fri, 25 Mar 2022 19:36:38 GMT

@Blackhawk1278 the ISE Posture file is stored in the following location

AC ISE Posture Profile: ISEPostureCFG.xml
• Windows: C:\ProgramData\Cisco\Cisco AnyConnect Secure Mobility Client\ISE Posture\
• MacOSX: /opt/cisco/AnyConnect/iseposture/

Reference

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2018/pdf/BRKSEC-3697-Reference.pdf