topic Re: cant connect ISE TO INTERNET in Network Access Control

cant connect ISE TO INTERNET

elheroual — Sun, 10 Apr 2022 20:38:18 GMT

Hi all

im using ISE for study installed in a VMware workstation But icant connect to internet
any idea ! i need to download anyconnect compliance
thanks

Arne Bier — Mon, 11 Apr 2022 03:47:03 GMT

that's not an ISE problem at all. This problem could apply to any VM in your lab that is not setup correctly.

Check your hypervisor network settings (are you bridging, or using NAT?) and then don't forget to configure a DNS server on the ISE CLI.

balaji.bandi — Mon, 11 Apr 2022 12:26:17 GMT

Looks like the host do not have NAT Rule, or routing to internet.

contact network and security team for this.

from command level are you able to ping 8.8.8.8 ?

elheroual — Mon, 11 Apr 2022 15:35:20 GMT

HI
no not able to ping 8.8.8.8

i tried to download the anyconnect compliance from cisco but idont have a service contract
some one can upload it for me pls
thanks

balaji.bandi — Mon, 11 Apr 2022 15:50:46 GMT

You need to contact local network team see ISE can reach to internet, in the path there may be FW which i think blocking.

elheroual — Wed, 13 Apr 2022 01:59:42 GMT

ty all guys

i works now after addeding asa firewall and configuration of nat
ty all for support

balaji.bandi — Wed, 13 Apr 2022 06:56:39 GMT

glad all working as expected.