topic Re: ISE reboot or VM reboot in Network Access Control

ISE reboot or VM reboot

markleibbrandt — Mon, 09 May 2022 14:29:27 GMT

Hi,

Does rebooting the ISE VM without halting ISE risk database corruption ? (are their any other risks?)

Thanks

balaji.bandi — Mon, 09 May 2022 14:31:18 GMT

you can safe to reboot, that will autmatically reboot all the process and come back as expected.

Mark Elsen — Mon, 09 May 2022 16:34:06 GMT

- Still I would advice halting ISE first

Mike.Cifelli — Mon, 09 May 2022 16:42:34 GMT

FYSA here are some helpful commands:

reload - will do the trick for you

application stop ise - gracefully stop services

application start ise - gracefully start services

If you need to completely shutdown:

application stop ise

halt

That shutdown workflow will help decrease risk of db corruption. HTH!

Marcelo Morais — Mon, 09 May 2022 22:46:21 GMT

STOP the Application process before RELOAD ou HALT the Appliance is a good practice.

Note 1: RELOAD the ISE (via the ise/admin# reload command) will stop the Processes first before the "real reload".

Hope this helps !!!