ISE 2.7 - Cannot add IP to interface gig 0

Rack&Stack — Thu, 26 May 2022 00:35:07 GMT

I've been trying to add an IP to my interface gig 0 but cannot. I'm in CLI via SSH..

configure
interface gig 0
ip address 192.168.1.223 255.255.255.0

I'm not prompted with the Yes or No prompt like I should be. When I type show interface gig 0, there is no IP:

This seems like a bug.. I'm running version 2.7.0.356 and just installed this as a home lab for practice. Does anyone have any clues on what my issue is?

Re: ISE 2.7 - Cannot add IP to interface gig 0

ahollifield — Thu, 26 May 2022 00:58:44 GMT

Use reset-config instead. This walks you through the ADE-OS setup process again.

topic ISE 2.7 - Cannot add IP to interface gig 0 in Network Access Control

ISE 2.7 - Cannot add IP to interface gig 0

Re: ISE 2.7 - Cannot add IP to interface gig 0