topic Re: Hardware client 3002 user Authentication in Network Access Control

Hardware client 3002 user Authentication

robert.mcclain — Fri, 21 Feb 2020 18:15:01 GMT

I have a 3002 concentrator connecting to a 3030. Using Lan Extension Mode. The 3002 is using DHCP to assign addresses. I want the users connecting to the 3002 to be forced to authenticate with a domain server on the head-end (3030 side). I want no one to gain access thru this tunnel without authentication. There are multiple VPNs connected to this device. Is it a matter of setting up the authentification server and putting a check in the group box for users? and if so, how does it affect other VPN's who are authenticated locally? Is there a way for both to co-exsist..running 4.7.2 on 3030.

Thanks in advance for any help

Re: Hardware client 3002 user Authentication

wong34539 — Wed, 22 Mar 2006 19:11:13 GMT

I don't think this will affect the other VPNs connected to the 3030 device. Because, I believe this authentication is anyway going to be done on a per user basis.

The following documents may help you more.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a0080094297.shtml

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/prod_configuration_examples_list.html

Re: Hardware client 3002 user Authentication

robert.mcclain — Tue, 28 Mar 2006 19:33:38 GMT

That worked fine, thank you very much.

Is there a link where you can modify the web page the user see's after logging in?