topic Re: Change 802.1x Version at Switch and ISE in Network Access Control

Change 802.1x Version at Switch and ISE

Thomas Kohb — Mon, 13 Jun 2022 07:49:08 GMT

Hey,

how can i change the 802.1x Version at devices ?

We will change to 2020 ... soon.

Re: Change 802.1x Version at Switch and ISE

Mohammed al Baqari — Mon, 13 Jun 2022 08:26:19 GMT

What do you mean by changing dot1x version?

Re: Change 802.1x Version at Switch and ISE

Thomas Kohb — Mon, 13 Jun 2022 09:14:39 GMT

Hey ,

there are 802.1x Versions 2004...2010..... 2020... IEEE ... standard versions..

Re: Change 802.1x Version at Switch and ISE

Mohammed al Baqari — Mon, 13 Jun 2022 09:29:19 GMT

But the version will be the implementation in IOS code. I don't think you
can modify that.

**** please remember to rate useful posts

Re: Change 802.1x Version at Switch and ISE

MHM Cisco World — Mon, 13 Jun 2022 11:24:31 GMT

you meaning IBN2.0 and IBN1.0??

Re: Change 802.1x Version at Switch and ISE

Thomas Kohb — Mon, 13 Jun 2022 14:06:44 GMT

Hey, ok … and where can i Identity , which Version is in iOS Version implemented ?

Re: Change 802.1x Version at Switch and ISE

Thomas Kohb — Tue, 14 Jun 2022 05:46:15 GMT

hey,

no... i mean ... the IEEE 802.x Version ... we will going from 2004 to 2020 of 802.1x IEEE Version...

Re: Change 802.1x Version at Switch and ISE

andrewswanson — Tue, 14 Jun 2022 07:33:36 GMT

The IEEE 802.1X-2020 standard states:

"This standard specifies a common architecture, functional elements, and protocols that support mutual authentication between the clients of ports attached to the same LAN and that secure communication between the ports, including the media access method independent protocols that are used to discover and establish the security associations used by IEEE 802.1AE(TM) MAC Security"

Do you mean that you are moving to MacSec between client and switch?

Andy