topic Re: Default route changed to incorrect interface after ISE upgrade to in Network Access Control

Default route changed to incorrect interface after ISE upgrade to 3.1.

kushar.gowda — Sat, 02 Jul 2022 17:39:58 GMT

Hi Community,

We have upgraded from ISE v3.0 to v3.1 p3 and after the upgrade, we are observing that default interface for service traffic is changed to eth0, whereas, before the upgrade it was through eth1. Hoping for any resolutions on this issue.

Thanks in advance.

Re: Default route changed to incorrect interface after ISE upgrade to

balaji.bandi — Sat, 02 Jul 2022 18:12:17 GMT

check is this affected BUG :

https://bst.cisco.com/bugsearch/bug/CSCwa04370

Re: Default route changed to incorrect interface after ISE upgrade to

kushar.gowda — Sat, 02 Jul 2022 18:20:26 GMT

Hi, Thanks for the reply. Yes, we are hitting this bug and also found one more bug CSCwa82553 : Bug Search Tool (cisco.com) related to it. Worked around provided in the bug solved the issue.

Re: Default route changed to incorrect interface after ISE upgrade to

balaji.bandi — Sun, 03 Jul 2022 18:58:52 GMT

But original post you mentioned that the interface changed, not the default route? ( any way both the bugs for your reference follow TAC guidance.