topic Re: ISE 3.0.0.458 Client Provisioning Resources download failed in Network Access Control

ISE 3.0.0.458 Client Provisioning Resources download failed

LuoJunZhi4816 — Mon, 11 Jul 2022 03:58:29 GMT

ISE can resolved the URL well ,but I just keep getting this error message

Can somebody help me to fix this issue ?

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

ahollifield — Mon, 11 Jul 2022 17:32:02 GMT

Firewall rule? Does ISE have access to the internet?

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

hslai — Tue, 12 Jul 2022 01:54:57 GMT

It could also be due to web proxy.

Most of these resources are available at the Cisco Software download, either under ISE or AnyConnect, so you might want to do that if this continues giving you problem.

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

LuoJunZhi4816 — Tue, 12 Jul 2022 06:12:12 GMT

Since we're still running the tests use only have one rule (allow any to any) ,and we can reach cisco.com or any other URL.

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

LuoJunZhi4816 — Tue, 12 Jul 2022 07:00:10 GMT

Hi hslai,

I found it on Cisco Software download ,but it's said that AnyConnect version 4.10 support only ISE 3.1 and later .

But the problem is 3.0.0.458 is the highest version that can be install on our cisco SNS 3500 series server. I can't even find the place to donwload anyconnect 4.3 at the Cisco Software download. Is there any suggestion for us

(((ISE Posture Compliance Library - Linux / Head-end deployment (PKG). This image can be used with AnyConnect version 4.10.2086 and later along with ISE 3.1 and later.)))

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

balaji.bandi — Tue, 12 Jul 2022 07:07:08 GMT

If you like the OLDER version of anyconnect, you need to contact TAC to provide that version, and download the section they removed that version.

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

ahollifield — Tue, 12 Jul 2022 13:26:41 GMT

You will have issues on Windows 10 and above with that old of AnyConnect Version. Why do you need AnyConnect 4.3? You should upgrade to 4.10. Yes, ISE 3.0 is the latest version that can run on an SNS-3515. Also time to probably think about a hardware replacement as well.

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

hslai — Wed, 13 Jul 2022 01:07:27 GMT

(((ISE Posture Compliance Library - Linux / Head-end deployment (PKG). This image can be used with AnyConnect version 4.10.2086 and later along with ISE 3.1 and later.)))

That one is for Linux support. Please sort by release dates.

Re: ISE 3.0.0.458 Client Provisioning Resources download failed

LuoJunZhi4816 — Tue, 19 Jul 2022 06:57:01 GMT

Thank you for all help,

I've contacted TAC and got the version I need . Now I can proceed to the next step.