topic Re: Remote Engine ID of ISE in Network Access Control

Remote Engine ID of ISE

sujanyakj — Fri, 13 May 2022 10:10:10 GMT

How to find the remote engine ID of ISE which will be used during snmp v3 configuration.

Re: Remote Engine ID of ISE

balaji.bandi — Fri, 13 May 2022 10:39:14 GMT

sotumu24/admin# show snmp-server engineID
Local SNMP EngineID: GKIILIFNGIC

check below information :

https://www.cisco.com/assets/sol/sb/Switches_Emulators_v2_2_015/help/nk_configuring_snmp05.html

https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/215521-configure-and-understand-snmp-traps-to-m.html

Re: Remote Engine ID of ISE

tonyang — Sat, 27 Aug 2022 15:34:37 GMT

Hi,

Reference the following command, may I ask if I need to input the Engine ID of remote SNMP server ? Thank you.

sotumu24/admin(config)# snmp-server host 10.127.197.81 version 3 SNMPUSER 0x474b49494c49464e474943 plain authpasswd privpasswd

Re: Remote Engine ID of ISE

balaji.bandi — Sat, 27 Aug 2022 16:09:20 GMT

depends on the requirement - read this :

https://www.cisco.com/assets/sol/sb/Switches_Emulators_v2_2_015/help/nk_configuring_snmp05.html

Re: Remote Engine ID of ISE

tonyang — Sun, 28 Aug 2022 03:28:05 GMT

Hi,

I'd like to configure the SNMP (v3) in Cisco ISE. It's failed to input the command "snmp-server engineid remote/local".

XXX/admin(config)# snmp-server engineid ?
<WORD> EngineID String (Max Size - 24)

Re: Remote Engine ID of ISE

Marcelo Morais — Sun, 28 Aug 2022 03:44:36 GMT

Hi @tonyang ,

to configure SNMP v3 on ISE:

ise/admin# conf t
ise/admin(config)# snmp-server enable
ise/admin(config)# snmp-server engineid <the same UDI as show udi command>
ise/admin(config)# snmp-server trap dskThresholdLimit <threshold>
ise/admin(config)# snmp-server community <community> ro
ise/admin(config)# snmp-server user <user> v3 plain <pass> <priv passwd>

Hope this helps !!!

Re: Remote Engine ID of ISE

balaji.bandi — Sun, 28 Aug 2022 09:22:25 GMT

follow the full thread from the beginning to get EngineID to add.