topic Re: ISE Patching Version 3.1 in Network Access Control

ISE Patching Version 3.1

zachartl — Tue, 04 Oct 2022 17:34:31 GMT

Hello,

We've just completed the installation of our Six ISE Nodes; 2 3695s and 4 3655s. The Software version is ISE Version 3.1.0.518

I'm still uncertain of the Patch Requirement. Would I need to install the Four (1-4) Version 3.1 Patches? Or, just Cumulative Patch 4? Or do I need to Patch at all given the ISE Version we're at now? I'm unable to so far discern that at present.

Thank you,

Terry

Re: ISE Patching Version 3.1

Marvin Rhoads — Wed, 19 Oct 2022 16:55:01 GMT

Since ISE patches are always cumulative, they include all fixes and updates in the earlier patch releases for a given version. So, in your case you need only install 3.1 Patch 4 (which is the current latest 3.1 patch as of this posting).

It's ""ise-patchbundle-3.1.0.518-Patch4-22091704.SPA.x86_64.tar.gz, found here:

https://software.cisco.com/download/home/283801620/type/283802505/release/3.1.0

(FYI, patch 2 was found to be defective and was withdrawn from the downloads site in case you were wondering.)

Re: ISE Patching Version 3.1

zachartl — Wed, 19 Oct 2022 19:22:08 GMT

Hello,

This helped immensely. Thank you for having responded and adding the information about patch 2.

Best Regards,

Terry