Cisco ISE intergration with Samsung MDM Knox

Nick Mavrou — Thu, 10 Nov 2022 20:37:33 GMT

Hi Guys,

I recently setup a lab with a successful integration between Cisco ISE - MS AD on premises - MS Intune and Fortimanager via pxgrid. So far all works fine, for authentication Cisco ISE checks the AD for a valid user and then for authorization it does check if the user belongs to a specified group and also if the laptop has a compliant status okay on Intune. Then it allocates a security group and pass it to fortimanager via pxgrid to perform user based policy.

All this has been done cos i am running a project for a big client. All of a sudden, the client now requires to check if Cisco ISE can integrate with Knox, the MDM platform of Samsung. I don't see any case study regarding that and not sure if it is doable anyway.

The point here is to allow only enterprise devices to connect to WiFi using AD credentials so the laptops are covered by the intune integration. I think there is a way to use the samsung tables with local users on Cisco ISE itself but will be really helpful if the in-question integration exists anyway.

Many Thanks

Re: Cisco ISE intergration with Samsung MDM Knox

Rob Ingram — Thu, 10 Nov 2022 20:45:15 GMT

@Nick Mavrou the guide below lists the MDMs that can integrate with ISE, unfortunately Samsung Knox is not on the list.

https://www.cisco.com/c/en/us/td/docs/security/ise/UEM-MDM-Server-Integration/b_MDM_UEM_Servers_CiscoISE/chapter.html

Re: Cisco ISE intergration with Samsung MDM Knox

Nick Mavrou — Thu, 10 Nov 2022 20:50:52 GMT

Thank you sir, at least I know that I need to find another way!

topic Re: Cisco ISE intergration with Samsung MDM Knox in Network Access Control

Cisco ISE intergration with Samsung MDM Knox

Re: Cisco ISE intergration with Samsung MDM Knox

Re: Cisco ISE intergration with Samsung MDM Knox