topic Re: Granular RBAC Permissions in Network Access Control

Granular RBAC Permissions

Anthony Owen — Wed, 28 Dec 2022 14:17:09 GMT

Hi all,

Looking for some help with defining some granular RBAC permissions for a user group.

I've created the user groups fine and I want to give them access to JUST Context Visibility > Endpoints > Authentication (and hid all other tabs under endpoints). At the moment the menu access privilages only allow me to select Context Visibility > Endpoints so all menus including BYOD, Compliance, Compromised Endpoints etc are all displayed. Any ideas if there is a way to achieve this. Can't locate anything documented.

Currently running 3.0.0.458

Re: Granular RBAC Permissions

Milos_Jovanovic — Fri, 30 Dec 2022 18:10:32 GMT

Hi @Anthony Owen,

With all current ISE releases, this is as far as you can restrict it (Context Visibility / Endpoints). Currently, it is not possible to restrict it further.

Kind regards,

Milos

Re: Granular RBAC Permissions

Anthony Owen — Thu, 05 Jan 2023 09:38:13 GMT

Thanks @Milos_Jovanovic

I thought that was likely the case, but just wanted to check nobody else had raised this before and there was no back end work around.