topic Re: Annyconect device scaning error in Network Access Control

Annyconect device scaning error

vitorbitencourt — Fri, 13 Jan 2023 18:03:05 GMT

Hi everyone

I'm trying to use Cisco Annyconect VPN for the first time, I can connect to the VPN, but when I'm redirected to the login page in the browser the device sacning always shows a timeout error message saying it took too long to scan and that I need to try again. I've done this several times so far and it's always the same results.

Does anyone know why is this happening and how can I fix it?

Re: Annyconect device scaning error

Rodrigo Diaz — Fri, 13 Jan 2023 20:18:46 GMT

Hi @vitorbitencourt , as per your description will you be doing posture with ISE ? What is the exact error you are getting ?

Re: Annyconect device scaning error

vitorbitencourt — Mon, 16 Jan 2023 13:24:52 GMT

Hey @Rodrigo Diaz thanks for the reply! I connect to the VPN, but them when the device security check starts in the browser the System Scan doesn't appear in the Annyconnect, so I don't think the security check is working. Is there something else I should do or install for that to work?

Re: Annyconect device scaning error

Rodrigo Diaz — Mon, 16 Jan 2023 18:41:38 GMT

As per what you described you might be hitting the bug CSCvr25989 , where you want to do ISE posture in a VPN connection whose machine does not have the system scan module already installed, what you will have to do is either install manually the ISE posture scan module as indicated here https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5686-install-cisco-anyconnect-secure-mobility-client-on-a-windows.html or you can make the machines get the required module through the firewall by uploading the image to the firewall https://www.cisco.com/c/en/us/support/docs/network-management/remote-access/212424-anyconnect-remote-access-vpn-configurati.html#anc15.

Let me know if that helped you .

Cheers.