topic Re: VPN authentication and authorization in Network Access Control https://community.cisco.com/t5/network-access-control/vpn-authentication-and-authorization/m-p/435484#M5797 <HTML><HEAD></HEAD><BODY><P>Follow these steps to configure filters.</P><P>In the Configuration | Interfaces window, select Ethernet1 (Private). The Configuration | Interfaces | Ethernet1 window appears.</P><P></P><P>Select the General tab.</P><P></P><P>Click the drop-down Filter menu button and choose Private (Default).</P><P></P><P>Click Apply.</P><P></P><P>In the Configuration | Interface window, select Ethernet2 (Public). The Configuration | Interfaces | Ethernet2 window appears.</P><P></P><P>Select the General tab.</P><P></P><P>Click the drop-down Filter menu button and choose Public (Default).</P><P></P><P>Click Apply.</P><P></P><P>Open the Configuration | Policy Management | Traffic Management | Filters window.</P><P></P><P>Select Private (Default) from the Filter list.</P><P></P><P>Click Assign Rules to Filter. The Configuration | Policy Management | Traffic Management | Assign Rules to Filter window appears.</P><P></P><P>Make sure that VCA In (forward/in) and VCA Out (forward/out) are in the Current Rules in Filter list. If they are not in this list, add them.</P><P></P><P>Click Done.</P><P></P><P>In the Configuration | Policy Management | Traffic Management | Filters window, select Public (Default) from the Filter list.</P><P></P><P>Click Assign Rules to Filter. The Configuration | Policy Management | Traffic Management | Assign Rules to Filter window appears.</P><P></P><P>Make sure that VCA In (forward/in) and VCA Out (forward/out) are in the Current Rules in Filter list. If they are not in this list, add them.</P><P></P><P>Click Done.</P><P></P><P>Click the Save Needed icon to save your edits.</P><P></P><P></P></BODY></HTML> Wed, 18 Jan 2006 21:25:22 GMT pradeepde 2006-01-18T21:25:22Z VPN authentication and authorization https://community.cisco.com/t5/network-access-control/vpn-authentication-and-authorization/m-p/435483#M5796 <P>I have configured in a VPN 3020 Concentrator a internal database for users authentication.</P><P>I need users could change theirs passwords remotely without the administrator help. Which method can do this better (Radius, AD?). I would like that passwords expire after a certain period if it´s possible. I don´t want to configure authorization servers, I prefer to use the VPN filters and rules.</P><P>Thanks.</P> Fri, 21 Feb 2020 18:14:14 GMT https://community.cisco.com/t5/network-access-control/vpn-authentication-and-authorization/m-p/435483#M5796 srivero 2020-02-21T18:14:14Z Re: VPN authentication and authorization https://community.cisco.com/t5/network-access-control/vpn-authentication-and-authorization/m-p/435484#M5797 <HTML><HEAD></HEAD><BODY><P>Follow these steps to configure filters.</P><P>In the Configuration | Interfaces window, select Ethernet1 (Private). The Configuration | Interfaces | Ethernet1 window appears.</P><P></P><P>Select the General tab.</P><P></P><P>Click the drop-down Filter menu button and choose Private (Default).</P><P></P><P>Click Apply.</P><P></P><P>In the Configuration | Interface window, select Ethernet2 (Public). The Configuration | Interfaces | Ethernet2 window appears.</P><P></P><P>Select the General tab.</P><P></P><P>Click the drop-down Filter menu button and choose Public (Default).</P><P></P><P>Click Apply.</P><P></P><P>Open the Configuration | Policy Management | Traffic Management | Filters window.</P><P></P><P>Select Private (Default) from the Filter list.</P><P></P><P>Click Assign Rules to Filter. The Configuration | Policy Management | Traffic Management | Assign Rules to Filter window appears.</P><P></P><P>Make sure that VCA In (forward/in) and VCA Out (forward/out) are in the Current Rules in Filter list. If they are not in this list, add them.</P><P></P><P>Click Done.</P><P></P><P>In the Configuration | Policy Management | Traffic Management | Filters window, select Public (Default) from the Filter list.</P><P></P><P>Click Assign Rules to Filter. The Configuration | Policy Management | Traffic Management | Assign Rules to Filter window appears.</P><P></P><P>Make sure that VCA In (forward/in) and VCA Out (forward/out) are in the Current Rules in Filter list. If they are not in this list, add them.</P><P></P><P>Click Done.</P><P></P><P>Click the Save Needed icon to save your edits.</P><P></P><P></P></BODY></HTML> Wed, 18 Jan 2006 21:25:22 GMT https://community.cisco.com/t5/network-access-control/vpn-authentication-and-authorization/m-p/435484#M5797 pradeepde 2006-01-18T21:25:22Z