topic Re: Another related bug is in Network Access Control

ISE Config Backup Failure - Data filesystem full above threshold

rick505d3 — Mon, 11 Mar 2019 05:07:28 GMT

Hi,

Both the config and operational backups were working until earlier last month. Now the config backup is failing with the following error. No configuration or repository settings were changed.

ISE 1.2.0.899 Patch 8 - Clustered with persona Node 1 = PAN, SMN, PSN .... Node 2 = SAN, PMN, PSN

CLI history says the same:

The local repository (disk:/) is looking good. The "/" filesystem is taking 77% space.

Although it may not be relevant. Data Purging is set to 30 days in the GUI and Operations -> Reports -> Data Purging Audit indicates its running daily with success i.e. threshold_space = 80GB, used_space = 3GB.

Is there a way to clean "/" filesystem ? It is filling up by roughly 1% every 5 days ? Note: the same on Node 2 is only 24% full.

Any ideas on how to get the config backup issue resolved ?

P.S. If images don't appear inline, please see the attachment

Thanks,

Rick.

Hello Rick, Did u solve this

CSCO12362011 — Thu, 18 Jun 2015 11:13:05 GMT

Hello Rick,

Did u solve this problem? Actually am facing the same problem with ISE 1.2.0.899 Patch 6.

% Error: The data filesystem is 90 percent full, which is above threshold of 70. Backup aborted.

Regards,

I have only been able to fix

jan.nielsen — Thu, 18 Jun 2015 16:36:17 GMT

I have only been able to fix this by contacting Cisco TAC, who can give you a root patch, which allows you to login to a "root" shell and delete the old log files, which is probably what is filling up that particular place on the disk.

CSCuq63732 Symptom:Backup

Venkatesh Attuluri — Mon, 22 Jun 2015 09:03:14 GMT

CSCuq63732

Symptom:
Backup failed alarm

Backup Failed : Server=*****; Message=Error: The data filesystem is NN percent full; which is above threshold of 70. Backup aborted

Conditions:
A restore is done to the deployment previously with large data set.

Workaround:
Contact Cisco TAC to clean up the files.

Another related bug is

Thomas Wall — Mon, 22 Jun 2015 15:22:51 GMT

Another related bug is CSCuJ97832 which causes the hard disk to fill up and cause backups to fail. If you still have access to the ISE CLI you can run the command application configure ISE from the primary MNT node and choose the option to reset the M&T session DB which will purge the files in the directory which caused this bug. If you have lost access to the CLI, you will need to call TAC to perform the process.

Re: Another related bug is

Jake Sullivan — Sun, 23 Apr 2023 01:49:01 GMT

application configure ise

[3]Purge M&T Operational Data

Set days to keep X