topic Re: Testing ISE Posture Assessment in ISE without Internet access in Network Access Control

Testing ISE Posture Assessment in ISE without Internet access

rezaalikhani — Tue, 13 Jun 2023 16:33:38 GMT

Hi all;

I have created a home LAB for ISE and unfortunately ISE does not have Internet access. As you know, one of the modules required for posture is ISECompliance Module. As I use demo license in ISE, so I do not have necessary information required to download this module offline form Cisco site. Now, in this situation, how can I access this module?

Thanks

Re: Testing ISE Posture Assessment in ISE without Internet access

ahollifield — Wed, 14 Jun 2023 13:19:56 GMT

Step 1	Navigate to Work Centers > Posture > Client Provisioning > Resources
Step 2	Click the "Add" button
Step 3	Select "Agent resources from Cisco site"
Step 4	Select the desired compliance module from the list
Step 5	Click Save

https://community.cisco.com/t5/security-knowledge-base/ise-posture-prescriptive-deployment-guide/ta-p/3680273#toc-hId--232251767

Re: Testing ISE Posture Assessment in ISE without Internet access

rezaalikhani — Wed, 14 Jun 2023 16:41:57 GMT

Thanks for your reply;

As I said, unfortunately my ISE box does not have Internet access.

Re: Testing ISE Posture Assessment in ISE without Internet access

ahollifield — Wed, 14 Jun 2023 16:54:26 GMT

The manual downloads from CCO require AnyConnect entitlements on your account. Without AnyConnect licensing associated with your account you cannot manually download the compliance module.

Re: Testing ISE Posture Assessment in ISE without Internet access

rezaalikhani — Wed, 14 Jun 2023 16:57:00 GMT

Thanks