topic Re: WAKE on LAN with dot1x in Network Access Control

WAKE on LAN with dot1x

AmrAbdelsalam — Tue, 20 Jun 2023 14:26:08 GMT

Hi all,

iam trying to send wake on lan packets from central sccm server,
i have edge switches cat9300

i configured access-session control-direction in
on all ports because i have dot1x configured

on closed ports and open ports, some machines wake up and some dont
is there any additional config needed from network side ?
thanks

Re: WAKE on LAN with dot1x

Flavio Miranda — Tue, 20 Jun 2023 22:27:53 GMT

You should try to use "authentication control-direction both"

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/17-3/configuration_guide/sec/b_173_sec_9300_cg/configuring_ieee_802_1x_port_based_authentication.html#ID2981

Re: WAKE on LAN with dot1x

MHM Cisco World — Tue, 20 Jun 2023 23:41:48 GMT

access-session control-direction in

And add

Spanning tree portfast