topic Re: ISE HW model in Network Access Control

ISE HW model

Gioacchino — Wed, 19 Jul 2023 10:15:51 GMT

Hi all,

what's the way to check the hardware model the ISE runs on?
I don't seem to find this info on the GUI.

Gio

Re: ISE HW model

DanielP211 — Wed, 19 Jul 2023 10:27:03 GMT

Hello,

You can use the command:
show inventory

But if the appliance is installed on a virtual infrastructure you wont see much.

BR

Re: ISE HW model

Gioacchino — Wed, 19 Jul 2023 11:11:16 GMT

Thanks @DanielP211 ,

yes, it's indeed an appliance.

Thank you,

Gio

Re: ISE HW model

Gioacchino — Wed, 19 Jul 2023 12:25:48 GMT

@DanielP211,

also in the GUI, Administration -> System -> Licensing

Re: ISE HW model

craiglebutt — Wed, 19 Jul 2023 12:38:59 GMT

You will need a VM Licences as well to run ISE on VM

Cheers

Re: ISE HW model

Gioacchino — Wed, 19 Jul 2023 13:34:02 GMT

Thanks @craiglebutt ,

was your intention to reply in this post ?
https://community.cisco.com/t5/network-access-control/yaiu-yet-another-ise-upgrade-question/td-p/4887685

Gio

Re: ISE HW model

Greg Gibbs — Wed, 19 Jul 2023 22:53:17 GMT

From the GUI, you can find what platform ISE identifies each individual node as from the ISE Counters report found in Operations > Reports > Diagnostics > ISE Counters
This will work for both hardware and VM platforms.

Example from my instance in Azure (this profile equates to the extra small instance type used for Eval):