topic Re: ISE 3.2 Patch 3 in Network Access Control

ISE 3.2 Patch 3

eiklin — Sun, 20 Aug 2023 05:25:49 GMT

Hi,

We are trying to apply Patch 3 of ISE 3.2 and found that the downloaded patch file has a wrong checksum as compared to the one specified on the website.

The downloaded patch file cannot be applied, and the error message was:

Any advise?

Re: ISE 3.2 Patch 3

Kasun Bandara — Sun, 20 Aug 2023 06:00:37 GMT

@eiklin try downloading again. downloaded file seems like corrupted.

Re: ISE 3.2 Patch 3

eiklin — Sun, 20 Aug 2023 06:22:53 GMT

We have tried multiple times and downloaded via different ISPs. still same issue.

Re: ISE 3.2 Patch 3

Leo Laohoo — Sun, 20 Aug 2023 07:50:34 GMT

Do not waste any time by contacting Cisco TAC. Whatever someone did over the weekend is beyond any control of TAC. This is the third (of four) threads that talks about corrupted file getting downloaded. Escalate and reach out to your Cisco Account Manager because this could be something bigger.

The other threads are:

Most importantly:

DO NOT DOWNLOAD ANYTHING until this is sorted.
If the file(s) have already been downloaded, do not make any attempts to unpack them.
I do not even want to spell out what needs to happen if the file(s) have been unpacked.

Re: ISE 3.2 Patch 3

thomas — Wed, 23 Aug 2023 13:55:31 GMT

Yes, this was a known problem last week. You may see the banner on software.cisco.com stating this:

Please try downloading again today. I just did it for ISE 3.2 Patch 3 and I got the correct checksum:

md5 ise-patchbundle-3.2.0.542-Patch3-23071904.SPA.x86_64.tar.gz
MD5 (ise-patchbundle-3.2.0.542-Patch3-23071904.SPA.x86_64.tar.gz) = 58cdb2e73ae699418e05bb3e85a79d7b

Re: ISE 3.2 Patch 3

eiklin — Thu, 24 Aug 2023 05:29:38 GMT

Thank you verified ok