topic Re: Apply Cisco ISE Default Setting in Network Access Control

Apply Cisco ISE Default Setting

mrigank shekhar chaubey — Mon, 18 Sep 2023 08:44:21 GMT

There is a starange exhibit while trying to accomplish following on WLC-2504 (SW ver. 8.5.182.0)

"Apply Cisco ISE Default settings" under WLAN > Edit 'XYZ' > Security > AAA Servers

The "Apply Cisco ISE Default settings" checkbox, under Radius Servers dissapears itself. Any suggestion for the remedy pls

Mark Elsen — Mon, 18 Sep 2023 09:16:00 GMT

mrigank shekhar chaubey — Mon, 18 Sep 2023 09:34:57 GMT

ISE Version is 3.2.0.401 v01

Mark Elsen — Mon, 18 Sep 2023 11:12:49 GMT

>ISE Version is 3.2.0.401 v01
- That is good ; recent version ; you may try the latest patch for ISE 3.2 (too) and upgrade the controller to the recommended release : https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6

thomas — Fri, 29 Sep 2023 23:46:06 GMT

I don't know how you got ISE 3.2.0.401. That is not a released and supported version of ISE. The offiicial ISE 3.2 image is 3.2.0.542.

The problem you describe is with the WLC, not ISE. Possibly a web browser or caching issue? If that does not work, call TAC.