topic Re: Installed Patches version under Patch management is empty in Network Access Control

Installed Patches version under Patch management is empty

adamscottmaster2013 — Tue, 14 Nov 2023 12:57:59 GMT

I have a cluster of 2 nodes ISE 3.2 patch-4: one node primary admin/mnt and another node is psn. I did the followings:

- fresh installed of ISE 3.2 on both sns-3655,

- applied patch-2 via the UI on both nodes,

- make node1 primary admin/mnt

- add node2 into node1

- everything is good so far,

- applied patch-4 via the UI to the cluster. Everything is good

- Now I can't see any patch version under Administration --> Patch Management . In other words, it is empty so if I want to rollback from patch-4 to patch-2, it is not an option in the UI,

- in the CLI of both nodes, I can see both patch-2 and patch-4 via the "show version" command.

Thoughts?

Re: Installed Patches version under Patch management is empty

Kasun Bandara — Tue, 14 Nov 2023 13:03:05 GMT

@adamscottmaster2013 GUI glitch 😄

Re: Installed Patches version under Patch management is empty

adamscottmaster2013 — Tue, 14 Nov 2023 13:43:01 GMT

@Kasun Bandara: Is there a bug ID for this?

Re: Installed Patches version under Patch management is empty

Kasun Bandara — Wed, 15 Nov 2023 08:58:54 GMT

Not for this issue. Better open a TAC Case to find out the issue.

Re: Installed Patches version under Patch management is empty

adamscottmaster2013 — Wed, 15 Nov 2023 12:09:03 GMT

@Kasun Bandara: so you don't know what the issue is and speculate that it is GUI glitch? Very helpful 🙂