topic Re: vpn client authentication. in Network Access Control https://community.cisco.com/t5/network-access-control/vpn-client-authentication/m-p/498744#M5869 <HTML><HEAD></HEAD><BODY><P>How many addresses are there in your pool, vpnpool1? I think if you do not have enough IP addresses, more clients may not be able to connect. Make sure you have at least 10 IP addresses in the pool of addresses that you define.</P></BODY></HTML> Thu, 30 Jun 2005 13:01:57 GMT smahbub 2005-06-30T13:01:57Z vpn client authentication. https://community.cisco.com/t5/network-access-control/vpn-client-authentication/m-p/498743#M5865 <P>hi!</P><P>i configured vpn on pix firewall.</P><P>easyvpn server.</P><P></P><P>but, after configuring vpn, only one people connet private network with vpn.</P><P></P><P>another people want to connet private network , but do not permit login.</P><P></P><P>my configuring is</P><P></P><P>vpngroup xxxx address-pool vpnpool1</P><P>vpngroup xxxx dns-server wwwserver 111.111.111.111</P><P>vpngroup xxxx wins-server wwwserver</P><P>vpngroup xxxx default-domain cisco.com</P><P>vpngroup xxxx split-tunnel vpn</P><P>vpngroup xxxx idle-time 1800</P><P>vpngroup xxxx password ********</P><P></P><P>how do i configure on firewall ?</P><P>my vpn client users are 10 people.</P><P></P><P>thanks.</P> Fri, 21 Feb 2020 18:12:57 GMT https://community.cisco.com/t5/network-access-control/vpn-client-authentication/m-p/498743#M5865 nivanak 2020-02-21T18:12:57Z Re: vpn client authentication. https://community.cisco.com/t5/network-access-control/vpn-client-authentication/m-p/498744#M5869 <HTML><HEAD></HEAD><BODY><P>How many addresses are there in your pool, vpnpool1? I think if you do not have enough IP addresses, more clients may not be able to connect. Make sure you have at least 10 IP addresses in the pool of addresses that you define.</P></BODY></HTML> Thu, 30 Jun 2005 13:01:57 GMT https://community.cisco.com/t5/network-access-control/vpn-client-authentication/m-p/498744#M5869 smahbub 2005-06-30T13:01:57Z