topic Re: CICM ISE upgrade - invalid ISO signature in Network Access Control

CICM ISE upgrade - invalid ISO signature

Gioacchino — Tue, 13 Feb 2024 20:29:15 GMT

It's been 4 hours now that I'm trying to upgrade the CICM of a C220M5 on which our ISE 2.7 patch 10 is installed.

It runs BIOS 4.0(1e)

I eventually got the same problem reported here:

https://community.cisco.com/t5/unified-computing-system-discussions/ucs-upgrade-fails-invalid-signature-detected/td-p/2983830

I'm not sure whether I have to follow what is said here

https://community.cisco.com/t5/unified-computing-system-discussions/ucs-upgrade-fails-invalid-signature-detected/m-p/3367981/highlight/true#M25313

or if I have to open a TAC case.

Since that thread is quite old, might be that meanwhile the ISE ISO files of new versions take care of the BIOS too? 🙂

TIA,

Gio

Re: CICM ISE upgrade - invalid ISO signature

Arne Bier — Tue, 13 Feb 2024 20:53:08 GMT

What model of SNS server is that? And which ISE CIMC image are you trying to install?

You're aware that ISE appliances must only be upgraded with the ISE CIMC images, and not any generic UCS CIMC image? Failure to do so will cause ISE to no longer boot.

Re: CICM ISE upgrade - invalid ISO signature

Gioacchino — Wed, 14 Feb 2024 10:17:36 GMT

Hi @Arne Bier ,

the model is SNS-3615-K9, and I'm trying to upgrade the BIOS (firmware) from 4.0(1e) to
4.3(2.230270)

I was not aware of what you said, but I may now understand being ISE a security product.

Is there a repository for such ISE CICM images?

Thanks, Gio

Re: CICM ISE upgrade - invalid ISO signature

Arne Bier — Wed, 14 Feb 2024 10:28:06 GMT

That’s quite a common misconception.
The approved (signed) CIMC images are found on software.cisco.com. Search for “ identity services” product. The check the categories- I think they call it firmware.

Re: CICM ISE upgrade - invalid ISO signature

Gioacchino — Wed, 14 Feb 2024 10:55:11 GMT

Indeed I found the Firmware section in the "Cisco Software Download"

Thanks, Gio

topic Re: CICM ISE upgrade - invalid ISO signature in Network Access Control

CICM ISE upgrade - invalid ISO signature

Re: CICM ISE upgrade - invalid ISO signature

Re: CICM ISE upgrade - invalid ISO signature

the model is SNS-3615-K9, and I'm trying to upgrade the BIOS (firmware) from 4.0(1e) to4.3(2.230270)

Re: CICM ISE upgrade - invalid ISO signature

Re: CICM ISE upgrade - invalid ISO signature

the model is SNS-3615-K9, and I'm trying to upgrade the BIOS (firmware) from 4.0(1e) to
4.3(2.230270)