topic Re: Authenticate against OID in Network Access Control https://community.cisco.com/t5/network-access-control/authenticate-against-oid/m-p/426272#M5880 <HTML><HEAD></HEAD><BODY><P>Cisco IOS cna only authenticate natively off to a Radius or TACACS server, or to the local user database. If your OID server (?) has a Radius interface then that will be fine, but other than that you need a Radius/TACACS server (like ACS) to interface between the two. To be honest I don't really know what OID is, but I'm pretty sure ACS doesn't interface to it anyway.</P></BODY></HTML> Tue, 07 Jun 2005 03:35:13 GMT gfullage 2005-06-07T03:35:13Z Authenticate against OID https://community.cisco.com/t5/network-access-control/authenticate-against-oid/m-p/426271#M5879 <P>I'm not sure if I'm in the right form but here it goes.</P><P></P><P>I have (4) AS5300's access servers and want to do Authentication directly to my OID server instead of to an ACS. </P><P></P><P>Can this be done? How and where can I find information on doing this? </P><P></P><P>Is there any pro or cons about doing this?</P><P></P><P>TIA</P> Fri, 21 Feb 2020 18:12:49 GMT https://community.cisco.com/t5/network-access-control/authenticate-against-oid/m-p/426271#M5879 ekeen 2020-02-21T18:12:49Z Re: Authenticate against OID https://community.cisco.com/t5/network-access-control/authenticate-against-oid/m-p/426272#M5880 <HTML><HEAD></HEAD><BODY><P>Cisco IOS cna only authenticate natively off to a Radius or TACACS server, or to the local user database. If your OID server (?) has a Radius interface then that will be fine, but other than that you need a Radius/TACACS server (like ACS) to interface between the two. To be honest I don't really know what OID is, but I'm pretty sure ACS doesn't interface to it anyway.</P></BODY></HTML> Tue, 07 Jun 2005 03:35:13 GMT https://community.cisco.com/t5/network-access-control/authenticate-against-oid/m-p/426272#M5880 gfullage 2005-06-07T03:35:13Z