Run a script or update an application after posturing

DK9 — Wed, 01 May 2024 07:00:13 GMT

Hi folks,

We are using anyconnect for vpn users and we use ISE for posturing the devices .

We are running on version 2.7 patch 9 so our requirment is we need to upgrade the client laptops manage engine desktop client in all laptops we have made a script for this but the problem is script will be working fine only after having sucessfull connection to our network so our requirement is to run the script after the posturing of ise .in version 3.2 we have a script condition where we van achieve this but we cant upgrade so is there any other workaround so that we can achive this.@ise

Re: Run a script or update an application after posturing

Mark Elsen — Wed, 01 May 2024 09:26:02 GMT

- Ref : https://www.cisco.com/c/en/us/products/collateral/security/identity-services-engine/bulletin-c25-2943876.html
For business flexibility and or needs it would still be better to consider upgrading , well actually because of lack of support too gradually becoming a requirement.

topic Re: Run a script or update an application after posturing in Network Access Control

Run a script or update an application after posturing

Re: Run a script or update an application after posturing