topic Re: show users problem in Network Access Control

show users problem

ddolbel — Sun, 10 Mar 2019 22:40:23 GMT

hi, i'm having a issue with show users on a cisco catalyst 3750

i'm logging in with a local user and I have tried logging in with a tacacs and radius account, when I do a show users on the switch it doesn't show the username,

however on the cisco 1841 router I have it shows the user information all the time,

if there a command I have to use on the switch to make it show user information ie username used to login, when the show users command is issued. I have tried to compare the configs however all the generic info seems to be the same.

ROUTER#sh users

Line User Host(s) Idle Location

194 vty 0 admin idle 00:12:37 10.0.0.13

Interface User Mode Idle Peer Address

SWITCH#sh users

Line User Host(s) Idle Location

2 vty 0 idle 00:12:37 10.0.0.13

Interface User Mode Idle Peer Address

I hope this makes sense

Thanks

Re: show users problem

craig.eyre — Wed, 05 Mar 2008 20:57:50 GMT

I checked this on my 3750's and it works fine. Did you see if it's a bug in the IOS you are running? I'm running 12.2(40) SE

Craig

Re: show users problem

kernorlin — Tue, 21 May 2024 09:55:12 GMT

This looks like someone hack to the network, isn't it?

TAIT6#show line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 0 0 0/0 -
65 AUX 9600/9600 - - - - - 0 0 0/0 -
* 66 VTY - - - - - 268 0 0/0 -
* 67 VTY - - - - - 160 0 0/0 -
68 VTY - - - - - 31 0 0/0 -
69 VTY - - - - - 9 0 0/0 -
70 VTY - - - - - 5 0 0/0 -

Line(s) not in async mode -or- with no hardware support:
1-64

TAIT6#show users
Line User Host(s) Idle Location
66 vty 0 idle 02:38:55 47.116.17.144
* 67 vty 1 tait idle 00:00:00 192.168.10.222

Interface User Mode Idle Peer Address
Vi2 PPPoE 00:00:03 168.95.98.254

Re: show users problem

ahollifield — Tue, 21 May 2024 13:01:31 GMT

? This post is from 2008.....