Endpoint PC with posture redirection less deep dive process work flow

Da ICS16 — Thu, 13 Jun 2024 01:30:01 GMT

Dear Community,

We use ISE 3.1 with LAN wired-dot1x (PC) and wired-dot1x MAB.

We use posture posture redirection less for check complaint status ( auth.C, auth.Z ).

We want to draw diagram process work flow with low level ( deep dive ) with below points.

1. PC connect switch (EoL) - using Ad user + password credential

2. Switch (port not opened )connect to ISE

3. ISE integrate with AD ( validate Ad user authentication )

4. ISE send infor to swtich (port open: when passed Ad user + machine certificate)

5. Endpoint PC become status complaint or pending

Switch: low impacted mode

Can you advise for detailed step by step from PC start authentication until get status Compliant?

It would be good if have document support / sample process flow.

Thanks for your supporting.

Re: Endpoint PC with posture redirection less deep dive process work f

MHM Cisco World — Thu, 13 Jun 2024 08:06:03 GMT

this help you

MHM