topic posture any connect in Network Access Control

posture any connect

sedaghati — Sat, 03 Aug 2024 11:05:50 GMT

It has been launched in an organizational posture with any connect

All clients become compliant except for one client that receives a( no response from the server) message during login in any connect and does not match any of the posture rules.

Re: posture any connect

Jonny Bacoz — Sat, 03 Aug 2024 12:14:44 GMT

The issue where one client receives a "no response from the server" message in AnyConnect and doesn't comply with posture rules could be due to several factors. First, ensure that the client device has a stable internet connection and can reach the server. Verify that there are no firewall or security settings on the client device blocking communication with the server. Check if the AnyConnect client software on the problematic device is up to date, and consider reinstalling it if necessary. Ensure that the posture rules are correctly configured and that the client's system meets all requirements. If the issue persists, reviewing server logs for any errors related to this specific client may provide more insight, and reaching out to IT support for further diagnostics might be necessary.

Re: posture any connect

ahollifield — Mon, 05 Aug 2024 12:34:19 GMT

https://community.cisco.com/t5/security-knowledge-base/ise-posture-prescriptive-deployment-guide/ta-p/3680273